Our free, local over-the-air television is carried out via signals. These signals are being sent from local TV broadcast towers. But there are occasions that they are being transmitted using both the VHF and UHF frequencies. While the majority of local network affiliates would broadcast their programming through the UHF frequency band, several TV stations would transmit with low-band VHF frequencies.
If you are compelled to meld signals together from 2 TV antennas so you can get your local broadcast channels, carry on reading this material. We will guide you through the steps that you need to follow to have this kind of setup running.
Your exact, geographical location is a determining factor that particular broadcast channels you are likely to receive. The TV antenna installation will greatly depend on the kind of transmitting towers that your area have and this will determine the type of TV antenna you need to have around to receive their signals.
In turn, the level of success you can have here will be dependent on several factors including land terrain as well as the various obstacles that may be presently existing between these broadcast towers and your home.
Determine the Frequency Bands Your Area is Utilizing
Guesswork may not have a good place here, so you need to move about and determine the exact transmitting frequency that the local TV stations in your area are using. To do this, several smartphone apps will let you locate in your area nearby broadcast towers. The channel that is being displayed on your TV is represented on the virtual channel column. For the actual frequency being transmitted, a DTV channel column will represent this instead.
If you happen to reside in a geographic location where both frequency bands, VHF and UHF, are transmitted, then it would make sense to use just one antenna. In most cases, bowtie antennas can manage to receive VHF broadcasts.
But if it so happens that the VHF signals in your area are weak, or if it is transmitting from a signal tower more than 36 miles from your place of residence, then the use of longer-range VHF antenna would be crucial. This will help ensure the reception of all available local stations.
Combing TV Antennas – UHF and VHF
For this purpose, we need to have access to a high-VHF, long-range antenna. While we can use this in conjunction with a new or existing UHF antenna, some users would make high claims that they were able to get consistent UHF antennas signal with this technique. They also received a high-VHF local channel, just see to it that you have a good quality long-range VHF antenna for this purpose alone.
Typically, what you will need to do is mount your UHF antenna to the top part of the mast. In case that the VHF signals you are wanting to receive happen to be much weaker compared to the UHF signals, installing a VHF antenna to the topmost part of your mast will help achieve for you better or desired results.